Standard Svensk standard · SS-EN ISO 5136

Akustik - Bestämning av ljudeffektnivåer från fläktar i ventilationsanläggningar - Mätning i kanal (ISO 5136:2003)

Status: Upphävd

· Ersätts av: SS-EN ISO 5136:2009
Köp denna standard

Standard Svensk standard · SS-EN ISO 5136

Akustik - Bestämning av ljudeffektnivåer från fläktar i ventilationsanläggningar - Mätning i kanal (ISO 5136:2003)
Prenumerera på standarden - Läs mer Dölj
Pris: 1 615 SEK
standard ikon pdf

PDF

Pris: 1 615 SEK
standard ikon

Papper

Fler alternativ Färre alternativ
Provläs denna standard
Omfattning
This International Standard specifies a method for testing ducted fans and other air-moving devices to determine the sound power radiated into an anechoically terminated duct on the inlet and/or outlet side of the equipment. NOTE 1 For the sake of brevity, wherever the term “fan” occurs in the text, it means “fan or other air-moving device”. The method is applicable to fans which emit steady, broad-band, narrow-band and discrete-frequency sound and to air temperatures between - 50 °C and + 70 °C. The test duct diameter range is from 0,15 m to 2 m. Test methods for small (d < 0,15 m) and large (d ! 2 m) test ducts are described in the informative Annexes H and I, respectively. The maximum mean flow velocity at the microphone head for which the method is suitable depends on the type of microphone shield used, and is as follows: --foam ball 15 m/s; --nose cone 20 m/s; --sampling tube 40 m/s. Above these values the suppression of turbulent pressure fluctuations by the microphone shield (see 3.9) may be insufficient. It is expected that sound power tests will be conducted in conjunction with airflow performance tests in accordance with ISO 5801. The ducting arrangement will therefore normally incorporate a “star” type flow straightener on the outlet side of the fan which will minimize swirl (see 7.3). Where it is permissible to delete the straightener as, for example, with large fans to installation category C according to ISO 5801:1997, the method is limited to a swirl angle of 15°. (An example of a method for determining the angle of swirl is given in Annex J.) NOTE 2 The installation categories defined in ISO 5801 imply that the fan is either ducted on the outlet side only (category B), on the inlet side only (category C) or on both sides (category D).

Ämnesområden

Buller och mätmetod (14.020) Buller förorsakat av maskiner och utrustning (17.140.20) Luftväxlare, fläktar, luftkonditionering (23.120)


Köp denna standard

Standard Svensk standard · SS-EN ISO 5136

Akustik - Bestämning av ljudeffektnivåer från fläktar i ventilationsanläggningar - Mätning i kanal (ISO 5136:2003)
Prenumerera på standarden - Läs mer Dölj
Pris: 1 615 SEK
standard ikon pdf

PDF

Pris: 1 615 SEK
standard ikon

Papper

Fler alternativ Färre alternativ

Produktinformation

Språk: Engelska

Framtagen av: Svenska institutet för standarder

Internationell titel: Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

Artikelnummer: STD-33925

Utgåva: 1

Fastställd: 2003-04-11

Antal sidor: 73

Ersätter: SS-EN 25136 , SS-ISO 5136

Ersätts av: SS-EN ISO 5136:2009